Administrator Guide

Version Description
9.12(1.0) Introduced on the S5048F–ON.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the file options.
7.6.1.0 Introduced on the S-Series.
Usage
Information
Without the page or stack-unit option, the command output is continuous. To interrupt the
command output, use Ctrl-z.
The save option works with other filtering commands. This allows you to save specific information of a
show command. The save entry must always be the last option. For example: DellEMC#show tech-
support |grep regular-expression |except regular-expression | find regular-
expression | save flash://result
This display output is an accumulation of the same information that is displayed when you execute one of
the following show commands:
● show version
●
show os-version
● show revision
● show clock
● show running-config
● show system stack-ports
● show interfaces
● show process memory
● show process cpu
● show file system
● show system
●
show environment
● show ip traffic
● show ip management route
● show ip route summary
● show Inventory
● show log summary
● show command-history (last 20 commands)
● show log
Example (options
under show tech-
support)
DellEMC# show tech-support ?
page Page through output
stack-unit Unit Number
| Pipe through a command
<cr>
DellEMC#show tech-support stack-unit 1 ?
Control and Monitoring 149