Administrator Guide

POE Capable : no
FIPS Mode : disabled
Boot Flash : 3.24.2.6
Boot Selector : 3.24.0.0-9
Memory Size : 2127638528 bytes
Temperature : 36C
Voltage : ok
Serial Number : NA
Part Number : 087651 Rev
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : CN-035GJR-77931-4BK-0003
PPID Revision : N/A
Service Tag : N/A
Expr Svc Code : 0
Auto Reboot : enabled
Burned In MAC : 74:e6:e2:f5:64:80
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed Power AvgPower AvgPowerStartTime
-------------------------------------------------------------------------------------
5 1 down UNKNOWN down 0 0 0 N/A
5 2 down AC absent 0 0 0 N/A
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed
------------------------------------------------------------------------------------
5 1 up up 0
5 2 up up 0
5 3 up up 0
Speed in RPM
show tech-support
Display a collection of data from other show commands, necessary for Dell EMC Networking technical support to perform
troubleshooting.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory usage for the
stack member designated by unit-id.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
When using the pipe command ( | ), enter one of these keywords to filter command
output. For details about filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A maximum of 20
characters.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Updated to display the show revision and show os-version command
outputs.
148 Control and Monitoring