Administrator Guide

ipv6–addr Enter the keyword ipv6–addr to specify the IPv6 address of the DAC.
hostname Enter the keyword hostname to enter the name of the host.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to associate a VRF with
the client.
key (Optional) Enter the keyword key to specify an encryption key.
encryption-type (Optional) Enter either 0 or 7 as the encryption type for the specified key. The
options are:
● 0 – implies that the key is not encrypted and is stored as clear text.
● 7 – implies that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the switch and the dynamic
authorization client. The key can be up to 42 characters long.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● It is possible to configure more than one dynamic authorization clients Duplicate (ipv4-addr or ipv6-
addr or host-name) configurations are not allowed.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,
S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FM-IOM, and
MXL.
client-key
Configures global shared key for the trusted DAC clients.
Syntax
client—key [encryption-type] key
To remove the shared key configuration, enter the no client-key command.
Defaults None.
Parameters
encryption-type: (OPTIONAL) Enter either 0 or 7 as the encryption type for the key entered. The
options are:
● 0 — is the default and means the key is not encrypted and stored as clear text.
● 7 — means that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the switch and RADIUS
servers. It can be up to 42 characters long.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● Configure global shared key applicable for DA clients. If client configuration has shared key configured,
that will take precedence.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
1360 Security