Administrator Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Example
DellEMC# show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
DellEMC#
show qos statistics
View QoS statistics.
Syntax
show qos statistics {egress—queue [interface]} | {wred-profile [interface]} |
[interface]
Parameters
egress-queue
interface
Enter the keyword egress-queue to display the egress-queue statistics and optionally one of the
following keywords and slot/port or number information.
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port
information.
● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/
port information.
wred-profile
interface
Enter the keywords wred-profile and optionally one of the following keywords and slot/port or
number information:
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port
information.
● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/
port information.
interface Enter one of the following keywords and slot/port or number information:
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port
information.
● For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/
port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS
Command Line Reference Guide.
Version Description
9.12(0.0) Modified to display the global WRED state.
9.11(0.0) Updated the show qos statistics egress—queue output to reflect per queue per port tx and
drop rates.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
Quality of Service (QoS) 1257