Administrator Guide

Example
DellEMC# show qos class-map
Class-map match-any CM
seq 5 Match ip access-group ACL
DellEMC#
Related
Commands
● class-map — identifies the class map.
show qos dot1p-queue-mapping
Displays the dot1p priority to queue mapping on the switch.
Syntax
show qos dot1p-queue-mapping
Defaults
● dot1p Priority: 0 1 2 3 4 5 6 7
● Queue: 1 0 0 1 2 2 3 3
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
trust dot1p, do1p-priority, service-class dynamic dot1; all these features work over the mapping in this
command output.
Related
Commands
● service-class dot1p-mapping — Identifies the class map.
show qos policy-map
View the QoS policy map information.
S3048–ON
Syntax
show qos policy-map {summary [interface] | detail}
Parameters
9.8(0.0P5) Introduced on the S4048-ON.
Quality of Service (QoS) 1251