Reference Guide

Target:iqn.2001-05.com.equallogic:0-8a0906-01251a00c-8ab26939fbd510a1-518
Initiator:iqn.1991-05.com.microsoft:win-rlkpjo4jun2
Up Time:00:00:16:02(DD:HH:MM:SS)
Time for aging out:29:23:59:35(DD:HH:MM:SS)
ISID:400001370000
Initiator Initiator Target Target Connection
IP Address TCP Port IP Address TCP Port ID
----------------------------------------------------------
10.10.10.210 54835 10.10.10.40 3260 1
OS10# show iscsi storage-devices
Interface Name Storage Device Name Auto Detected Status
-----------------------------------------------------------
ethernet1/1/23 EQL-MEM true
iSCSI commands
iscsi aging
Sets the aging time for monitored iSCSI sessions.
Syntax
iscsi aging [time minutes]
Parameters time minutes — Enter the aging time in minutes allowed for monitoring iSCSI sessions (5 to 43,200).
Default 10 minutes
Command Mode CONFIGURATION
Usage Information Congure the aging time allowed for monitored iSCSI sessions on TCP ports before the session closes. The no
version of this command disables the aging time.
Example
OS10(config)# iscsi aging time 30
Supported Releases 10.3.0E or later
iscsi enable
Enables iSCSI auto-detection of attached storage arrays and switch auto-conguration.
Syntax
iscsi enable
Parameter None
Default Enabled on S4048T-ON/S4048-ON; disabled on others
Command Mode CONFIGURATION
Usage Information iSCSI optimization automatically detects storage arrays and auto-congures switch ports with the iSCSI
parameters received from a connected device. The no version of this command disables iSCSI auto-detection.
Example
OS10(config)# iscsi enable
Supported Releases 10.3.0E or later
534 Converged data center services