Reference Guide

reload
Reloads the software and reboots the ONIE-enabled device.
Syntax
reload
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use caution while using this command, as it reloads the OS10 image and reboots the device.
Example
OS10# reload
Proceed to reboot the system? [confirm yes/no]:y
Supported Releases 10.2.0E or later
show alias
Displays congured alias commands available in both persistent and non-persistent modes.
Syntax
show alias [brief | detail]
Parameters
• brief — Brief information of aliases.
• detail — Detail information of aliases.
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show alias
Name Type
---- ----
govlt Config
goint Config
shconfig Local
showint Local
shver Local
Number of config aliases : 2
Number of local aliases : 3
Example (brief)
OS10# show alias brief
Name Type Value
---- ---- -----
govlt Config "vlt-domain..."
goint Config "interface ..."
shconfig Local "show runni..."
showint Local "show inter..."
shver Local "show versi..."
Number of config aliases : 2
Number of local aliases : 3
Getting Started 49