Reference Guide

interface breakout 1/1/20 map 40g-1x

interface breakout 1/1/21 map 40g-1x

interface breakout 1/1/22 map 40g-1x

interface breakout 1/1/23 map 40g-1x

interface breakout 1/1/24 map 40g-1x

interface breakout 1/1/25 map 40g-1x

interface breakout 1/1/26 map 40g-1x

interface breakout 1/1/27 map 40g-1x

interface breakout 1/1/28 map 40g-1x

interface breakout 1/1/29 map 40g-1x

interface breakout 1/1/30 map 40g-1x

interface breakout 1/1/31 map 40g-1x

interface breakout 1/1/32 map 40g-1x

ipv6 forwarding enable

username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD7/VKx8SloIhp4NoGZs0I/

UNwh8WVuxwfd9q4pWIgNs5BKH. role sysadmin

aaa authentication local

snmp-server contact http://www.dell.com/support

interface range ethernet 1/1/1-1/1/32

switchport access vlan 1

no shutdown

interface vlan 1

no shutdown

interface mgmt1/1/1

ip address dhcp

no shutdown

ipv6 enable

ipv6 address autoconfig

support-assist

policy-map type application policy-iscsi

class-map type application class-iscsi

class-map type qos class-trust

Show dierence between candidate and running congurations

OS10# show diff candidate-configuration running-configuration

OS10#

NOTE

: If the OS10# prompt does not return output, the candidate-configuration and running-configuration les

match.

Protect candidate conguration le

You can protect the device conguration from being modied with the lock and unlock commands. Use the lock and unlock commands

in EXEC mode to lock the candidate conguration. If a conguration is locked, users cannot modify the candidate conguration.

Lock candidate conguration

OS10# lock

Unlock candidate conguration

OS10# unlock

Getting Started