Reference Guide

switchport access vlan 1
no shutdown
!
interface ethernet1/1/4
switchport access vlan 1
no shutdown
!
interface ethernet1/1/5
switchport access vlan 1
no shutdown
!
interface ethernet1/1/6
switchport access vlan 1
no shutdown
!
.....
.....
interface vlan1
no shutdown
!
interface mgmt1/1/1
no shutdown
!
support-assist
!
track 10
track-interface ethernet1/1/1
VRRP commands
advertise-interval
Sets the time interval between VRRP advertisements.
Syntax
advertise-interval [seconds | centisecs centisecs]
Parameters
• seconds — Set the advertise interval in seconds (1 to 255).
• centisecs centisecs — (Optional) Enter a value in multiples of 25 (25 to 4075).
Default 1 second or 100 centisecs
Command Mode INTERFACE-VRRP
Usage Information Dell EMC recommends keeping the default setting for this command. If you do change the time interval between
VRRP advertisements on one router, change it on all routers. The no version of this command sets the VRRP
advertisements timer interval back to its default value (1 second or 100 centisecs).
Example
OS10(conf-eth1/1/6-vrid-250)# advertise-interval 120 centisecs 100
Supported Releases 10.2.0E or later
authentication-type
Enables authentication of VRRP data exchanges.
Syntax
authentication-type simple-text password [auth-text]
328 Layer 3