Reference Guide

Example
OS10(conf-route-map)# set ip next-hop 10.10.10.10
Supported Releases 10.3.0E or later
set next-hop track
Sets the next-hop IPv4 or IPv6 address to track the PBR object.
Syntax
set {ip | ipv6} next-hop address track track-id
Parameters
• address—Enter an IPv4 or IPv6 address.
• track-id—(Optional) Enter the track ID of the PBR object.
Defaults Not congured
Command Mode ROUTE-MAP
Usage Information None
Example
OS10(conf-route-map)# set ip next-hop 10.10.10.10 track-id 12
Supported Releases 10.3.0E or later
show policy
Displays policy information.
Syntax
show {ip | ipv6} policy [map-name]
Parameters map-name — (Optional) Enter the name of a congured route map (up to 140 characters).
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show ip policy map-name
Supported Releases 10.3.0E or later
show route-map pbr-statistics
Displays the current PBR statistics.
Syntax
show route-map [map-name] pbr-statistics
Parameters map-name — (Optional) Enter the name of a congured route map (up to 140 characters).
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show route-map map1 pbr-statistics
Layer 3 319