Reference Guide

Parameters instance-number — Enter an OSPFv3 instance number (1 to 65535).
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear ipv6 ospf 3 process
Supported Releases 10.3.0E or later
log-adjacency-changes
Enables logging of syslog messages about changes in the OSPFv3 adjacency state.
Syntax
log-adjacency-changes
Parameters None
Default Disabled
Command Mode ROUTER-OSPF and ROUTER-OSPFv3
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# router ospfv3 10
OS10(conf-router-ospf-10)# log-adjacency-changes
Supported Releases 10.3.0E or later
maximum-paths
Enables forwarding of packets over multiple paths.
Syntax
maximum—paths number
Parameters number —Enter the number of paths for OSPF (1 to 64).
Default 64
Command Mode ROUTER-OSPF and ROUTER-OSPFv3
Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# router ospfv3 10
OS10(conf-router-ospf-10)# maximum-paths 1
Supported Releases 10.3.0E or later
ipv6 ospf area
Attaches an interface to an OSPF area.
Syntax
ipv6 ospf process-id area area-id
Parameters
• process-id—Enter an OSPFv3 process ID for a specic OSPFv3 process (1 to 65535).
302 Layer 3