Reference Guide

The ONIE auto-discovery process discovers the image le at the specied USB path, loads the software image, and reboots.

Log into OS10

To log in to OS10 Enterprise Edition, power up the device and wait for the system to perform a power-on self test (POST). Enter admin

for both the default user name and user password. For better security, change the default admin password during the rst OS10 login.

The system saves the new password for future logins.

OS10 login: admin

Password: admin

Last login: Mon Mar 20 13:58:27 2017 on ttyS0

The programs included with the Debian GNU/Linux system are free software;

the exact distribution terms for each program are described in the

individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent

permitted by applicable law.

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-

-* Dell EMC Network Operating System (OS10) *-

-* *-

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-

This product is protected by U.S. and international copyright and

intellectual property laws. Dell EMC and the Dell EMC logo are

trademarks of Dell Inc. in the United States and/or other

jurisdictions. All other marks and names mentioned herein may be

trademarks of their respective companies.

OS10#

Install OS10 license

OS10 comes with a 120-day trial license. To continue with uninterrupted service, the installation of a perpetual license is required or the

ONIE-enabled device reboots every 72 hours.

After you install OS10 and log in, you must install the license to run the OS10 Enterprise Edition past the trial license. See Download OS10

image and license for complete information. The OS10 license is installed in the /mnt/license directory.

• Install the license le from a local or remote location in EXEC mode.

license install {ftp: | http: | localfs: | scp: | sftp: | tftp: | usb:} filepath

• ftp://userid:passwd@hostip/filepath — Copy from a remote FTP server

• http://hostip/filepath — Copy from a remote HTTP server

• http://hostip — Send request to a remote HTTP server.

• localfs://filepath — Install from a local le directory.

• scp://userid:passwd@hostip/filepath — Copy from a remote SCP server

• sftp://userid:passwd@hostip/filepath — Copy from a remote SFTP server

• tftp://hostip/filepath — Copy from a remote TFTP server

• usb://filepath — Install from a le directory on a storage device connected to the USB storage port on the switch

• filepath — Enter the directory path where the license le is stored

Install license

OS10# license install scp://user:userpwd/10.1.1.10/CFNNX42-NOSEnterprise-License.lic

License installation success.

Getting Started