Reference Guide

shut
Enables port monitoring.
Syntax
shut
Parameters None
Default Disabled
Command Mode MONITOR-SESSION
Usage Information The no version of this command resets the value to disabled.
Example
OS10(config)# monitor session 10
OS10(conf-mon-local-10)# shut
Supported Releases 10.2.0E or later
source (Port Monitoring)
Congures a source for port monitoring.
Syntax
source interface interface {both | rx | tx}
Parameters
interface — Enter the interface type:
ethernet node/slot/port[:subport] — Enter the Ethernet interface information as the
monitored source.
port-channel id-number — Enter the port-channel interface number as the monitored source (1 to
128).
vlan vlan-id —Enter the VLAN identier as the monitored source (1 to 4094).
both — Monitor both receiving and transmitting packets.
rx — Monitor only received packets.
tx — Monitor only transmitted packets.
Default Not congured
Command Mode MONITOR-SESSION
Usage Information None
Example
OS10(config)# monitor session 10
OS10(conf-mon-local-10)# source interface ethernet 1/1/7 rx
Supported Releases 10.2.0E or later
192 Layer 2