Reference Guide
---------------------------------------------------------------
1 vlan10 vlan 100 rx N/A N/A N/A N/A true Is UP
Port monitoring commands
description (Port Monitoring)
Congures a description for the port monitoring session.
Syntax
description string
Parameters string — Enter a description of this session (up to 80 characters).
Default Not congured
Command Mode MONITOR-SESSION
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-mon-local-1)# description remote
Supported Releases 10.2.0E or later
destination (Port Monitoring)
Sets the destination where monitored trac is sent to.
Syntax
destination interface
Parameters interface — Enter the interface type:
• ethernet node/slot/port[:subport] — Enter the Ethernet interface information as the destination.
• port-channel id-number — Enter a port-channel number as the destination (1 to 128).
• vlan vlan-id —Enter a VLAN number as the destination (1 to 4094).
Default Not congured
Command Mode MONITOR-SESSION
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-mon-local-10)# destination interface port-channel 10
Supported Releases 10.2.0E or later
ow-based
Enables ow-based monitoring.
Syntax
flow-based enable
Parameters enable — Enable ow-based monitoring.
Default Disabled
190 Layer 2