Reference Guide

Supported Releases 10.2.0E or later
show lldp timers
Displays the LLDP hold time, delay time, and update frequency interval conguration information.
Syntax
show lldp timers
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 6
Transmit interval in seconds: 30
Supported Releases 10.2.0E or later
show lldp tlv-select interface
Displays the TLVs enabled for an interface.
Syntax
show lldp tlv-select interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport] — Enter the Ethernet interface information (1 to 253).
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show lldp tlv-select interface ethernet 1/1/4
port-description
system-name
system-description
system-cababilities
management-address
port-vlan
mac-phy-config
link-aggregation
max-frame-size
Supported Releases 10.2.0E or later
show lldp trac
Displays LLDP trac information including counters, packets transmitted and received, discarded packets, and unrecognized TLVs.
Syntax
show lldp traffic [interface ethernet node/slot/port[:subport]]
Parameters interface ethernet node/slot/port[:subport] — (Optional) Enter the Ethernet interface
information to view the LLDP trac.
Layer 2 131