Reference Guide

Supported Releases 10.2.0E or later
lldp med fast-start-repeat-count
Congures the number of packets sent during the activation of the fast start mechanism.
Syntax
lldp-med fast-start-repeat-count number
Parameters number — Enter the number of packets sent during the activation of the fast start mechanism (1 to 10).
Default 3
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# lldp med fast-start-repeat-count 5
Supported Releases 10.2.0E or later
lldp med
Enables or disables LLDP-MED on an interface.
Syntax
lldp med {enable | disable}
Parameters
• enable — Enable LLDP-MED on the interface.
• disable — Disable LLDP-MED on the interface.
Default Enabled with network-policy TLV
Command Mode INTERFACE
Usage Information LLDP-MED communicates the types of TLVs that the endpoint device and the network connectivity device
support. Use the no lldp med or lldp med disable command to disable LLDP-MED on a specic
interface.
Example
OS10(conf-if-eth1/1/1)# lldp med disable
Supported Releases 10.2.0E or later
lldp med network-policy
Manually denes an LLDP-MED network policy.
Syntax
lldp-med network-policy number app {voice | voice-signaling | guest-voice |
guestvoice-signaling | softphone-voice | streaming-video | video-conferencing |
video-signaling} {vlan vlan-id vlan-type {tag | untag} priority priority dscp
dscp value}
Parameters
• number — Enter a network policy index number (1 to 32).
• app — Enter the type of the applications available for the network policy:
• voice — Voice network-policy application.
• voice-signaling — Voice-signaling network-policy application.
Layer 2 123