Reference Guide

LLDP commands
clear lldp counters
Clears LLDP and LLDP-MED transmit, receive, and discard statistics from all the physical interfaces.
Syntax
clear lldp counters
Parameters None
Default Not congured
Command Mode EXEC
Usage Information The counter default value resets to zero for all physical interfaces.
Example
OS10# clear lldp counters
Supported Releases 10.2.0E or later
clear lldp table
Clears LLDP neighbor information for all interfaces.
Syntax
clear lldp table
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Neighbor information clears on all interfaces.
Example
OS10# clear lldp table
Supported Releases 10.2.0E or later
lldp holdtime-multiplier
Congures the multiplier value for the hold time (in seconds).
Syntax
lldp holdtime-multiplier integer
Parameters integer — Enter the holdtime-multiplier value in seconds (2 to 10).
Default 4 seconds
Command Mode CONFIGURATION
Usage Information Hold time is the amount of time (in seconds) that a receiving system waits to hold the information before
discarding it. Formula: Hold Time = (Updated Frequency Interval) X (Hold Time Multiplier). The no version of this
command resets the value to the default.
Example
OS10(config)# lldp holdtime-multiplier 2
122 Layer 2