Reference Guide

clear lacp counters
Clears the statistics for all interfaces for LACP groups.
Syntax
clear lacp counters [interface port-channel channel-number]
Parameters
• interface port-channel — (Optional) Enter the interface port-channel number.
• channel-number — (Optional) Enter the LACP port-channel number (1 to 128).
Default Not congured
Command Mode EXEC
Usage Information If you use this command for a static port-channel group without enabling the aggregation protocol, the device
ignores the command. If you do not enter a port-channel number, the LACP counters for all LACP port groups
clear.
Example
OS10# clear lacp counters
Example (Port-
Channel)
OS10# clear lacp counters interface port-channel 20
Supported Releases 10.2.0E or later
lacp max-bundle
Congures the maximum number of active members allowed in a port-channel.
Syntax
lacp max-bundle max-bundle-number
Parameters max-bundle-number — Enter the maximum bundle size (1 to 32).
Default 32
Command Mode INTERFACE
Usage Information The no version of this command resets the maximum bundle size to the default value.
Example
OS10(conf-if-po-10)# lacp max-bundle 10
OS10(conf-if-po-10)# do commit
Supported Releases 10.2.0E or later
lacp port-priority
Sets the priority for the physical interfaces for LACP.
Syntax
lacp port-priority priority
Parameters priority — Enter the priority for the physical interfaces (0 to 65535).
Default 32768
Command Mode INTERFACE
Usage Information LACP uses the port priority with the port number to create the port identier. The port priority decides which
ports are put into Standby mode when there is a hardware limitation that prevents all compatible ports from
106 Layer 2