Reference Guide

logging enable
Enables system logging.
Syntax
logging enable
To disable the logging capability, use the no logging enable command.
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command disables all logging.
Example
OS10(config)# logging enable
Supported Releases 10.2.0E or later
logging log-le
Disables, enables, or sets the minimum severity level for logging to the logle.
Syntax
logging log-file {disable | enable | severity}
To reset the log-le severity to the default level, use the no logging log-file severity command. The
default severity level is log-notice.
Parameters severity — Set the minimum logging severity level:
• log-emerg — Set the system as unusable.
• log-alert — Set to immediate action is needed.
• log-crit — Set to critical conditions.
• log-err — Set to error conditions.
• log-warning — Set to warning conditions.
• log-notice — Set to normal but signicant conditions (default).
• log-info — Set to informational messages.
• log-debug — Set to debug messages.
Default Log-notice
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# logging log-file disable
Example (Enable)
OS10(config)# logging log-file enable
Example (Severity)
OS10(config)# logging log-file severity log-notice
Supported Releases 10.2.0E or later
620 Troubleshoot OS10