Reference Guide

match vlan
Congures a match criteria based on the VLAN ID number.
Syntax
match vlan vlan-id
Parameters vlan-id — Enter a VLAN ID number (1 to 4094).
Default Not congured
Command Mode CLASS-MAP
Usage Information You cannot enter two match statements with the same lter-type. If you enter two match statements with the
same lter-type, the second statement overwrites the rst statement.
Example
OS10(conf-cmap-qos)# match vlan 100
Supported Releases 10.2.0E or later
mtu
Calculates the buer size allocation for matched ows.
Syntax
mtu size
Parameters size — Enter the size of the buer (1500 to 9216).
Default 9216
Command Mode POLICY-MAP-CLASS-MAP
Usage Information The no version of this command returns the value to the default.
Example
OS10(conf-pmap-nqos-c)# mtu 2500
Supported Releases 10.3.0E or later
pause
Enables a pause based on buer limits for the port to start or stop communication to the peer.
Syntax
pause [buffer-size size pause-threshold xoff-size resume-threshold xon-size]
Parameters
• buffer-size size — (Optional) Enter the ingress buer size which is used as a guaranteed buer in KB
(defaults 10G 45, 40G 93).
• pause-threshold xoff-size — (Optional) Enter the buer limit for the port to start or initiate a pause
to the peer in KB (defaults 10G 9, 40G 18).
•
resume-threshold xon-size — (Optional) Enter the buer limit for the port to stop or cancel sending a
pause to the peer in KB (defaults 10G 9, 40G 9).
Default See parameter values
Command Mode POLICY-MAP-CLASS-MAP
Quality of service 501