Reference Guide

Example
(Connected)
OS10((config-router-ospfv3-100)# redistribute connected route-map dell2
Supported Releases 10.3.0E or later
router-id
Congures a xed router ID for the OSPFv3 process.
Syntax
router-id ip-address
Parameters ip-address — Enter the IP address of the router as the router ID.
Default Not congured
Command Mode ROUTER-OSPFv3
Usage Information Congure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the xed
router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3
adjacency. The new router ID is eective at the next reload. The no version of this command disables the router ID
conguration.
Example
OS10(config)# router ospfv3 10
OS10(config-router-ospfv3-100)# router-id 10.10.1.5
Supported Releases 10.3.0E or later
router ospfv3
Enters Router OSPFv3 mode and congures an OSPFv3 instance.
Syntax
router ospfv3 instance-number
Parameters instance-number—Enter a router OSPFv3 instance number, from 1 to 65535.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes an OSPFv3 instance.
Example
OS10(config)# router ospfv3 10
Supported Releases 10.3.0E or later
show ipv6 ospf
Displays OSPFv3 instance conguration information.
Syntax
show ipv6 ospf [instance-number]
Parameters instance-number — (Optional) View OSPFv3 information for a specied instance number (1 to 65535)
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show ipv6 ospf
Routing Process ospfv3 200 with ID 1.1.1.1
It is an Area Border Router
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
332 Layer 3