Deployment Guide
41 VxFlex Network Deployment Guide using Dell EMC Networking 25GbE switches and OS10EE
E Supported switches
Steps in this document were validated using specific Dell EMC Networking switches and OS10EE but may be
used for other Dell EMC Networking switch models that use the same networking operating system or later.
Depending on a switch’s available port numbers, speeds, and types, minor adjustments may be required to
the example commands provided in this guide to achieve the same results.
The table below shows all switches that can be configured using the directions provided in this guide. For the
leaf switches, the switches must support OS10EE version 10.4.2.2 or later and must also support 25GbE
connections.
Supported switches for this deployment guide
For the latest list of 25GbE switches from Dell EMC, visit Dell Networking S-Series 25-100GbE switches.