Deployment Guide

17 VxFlex Network Deployment Guide using Dell EMC Networking 25GbE switches and OS10EE
Note: If OS10EE was factory installed, a perpetual license is already on the switch.
Set the factory defaults of your switches to remove any current configuration. The following commands set
switches running OS10EE to their factory default settings:
OS10# delete startup-configuration
Proceed to delete startup-configuration [confirm yes/no(default)]:y
OS10# reload
System configuration has been modified. Save? [yes/no]:n
Proceed to reboot the system? [confirm yes/no]:y
The switch is now ready for configuration.