Users Guide

spanning-tree msti
Congure multiple spanning tree instance cost and priority for an interface.
Syntax
spanning-tree msti instance {cost cost | priority priority}
Parameters
msti instance Enter the keyword msti and the MST instance number. The range is from zero (0)
to 63.
cost cost (OPTIONAL) Enter the keyword cost then the port cost value. The range is from
1 to 200000. The defaults are:
• 100 Mb/s Ethernet interface = 200000
• 1-Gigabit Ethernet interface = 20000
• 10-Gigabit Ethernet interface = 2000
• Port Channel interface with one 100 Mb/s Ethernet = 200000
• Port Channel interface with one 1 Gigabit Ethernet = 20000
• Port Channel interface with one 10 Gigabit Ethernet = 2000
• Port Channel with two 1 Gigabit Ethernet = 18000
• Port Channel with two 10 Gigabit Ethernet = 1800
• Port Channel with two 100 Mbps Ethernet = 180000
priority priority Enter keyword priority then a value in increments of 16 as the priority. The
range is from 0 to 240. The default is 128.
Defaults
• cost = depends on the interface type
• priority = 128
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
984
Multiple Spanning Tree Protocol (MSTP)