Users Guide
revision
The revision number for the multiple spanning tree conguration.
Syntax
revision range
To return to the default values, use the no revision command.
Parameters
range Enter the revision number for the MST conguration. The range is from 0 to
65535. The default is 0.
Defaults 0
Command Modes MULTIPLE SPANNING TREE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage Information For two MSTP switches to be within the same MST region, the switches must share the same revision
number.
Related Commands
msti — maps the VLAN(s) to an MST instance.
name — assigns the region name to the MST region.
978
Multiple Spanning Tree Protocol (MSTP)