Users Guide

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.4.1.0 Introduced

Related Commands show ip msdp sa-cache rejected-sa — displays the rejected SAs in the SA cache.

ip msdp default-peer

Dene a default peer from which to accept all source-active (SA) messages.

Syntax

ip msdp default-peer peer address [list name]

To remove the default peer, use the no ip msdp default-peer {peer address} list name

command.

Parameters

peer address Enter the peer address in a dotted decimal format (A.B.C.D.)

list name Enter the keywords list name and specify a standard access list that contains

the RP address that should be treated as the default peer. If no access list is

specied, then all SAs from the peer are accepted.

Defaults Not congured.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.