Users Guide
32
Multicast Source Discovery Protocol (MSDP)
Multicast source discovery protocol (MSDP) connects multiple PIM Sparse-Mode (PIM-SM) domains together.
MSDP peers connect using TCP port 639. Peers send keepalives every 60 seconds. A peer connection is reset after 75 seconds if
no MSDP packets are received. MSDP connections are parallel with MBGP connections.
The Dell Networking operating system supports MSDP commands on the S3048–ON platform.
clear ip msdp peer
Reset the TCP connection to the peer and clear all the peer statistics.
Syntax
clear ip msdp peer {peer address}
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.)
Defaults Not congured.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
6.2.1.1 Introduced
954
Multicast Source Discovery Protocol (MSDP)