Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

861

862

863

864

865

866

867

868

869

870

Version Description

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

passive-interface

Suppress routing updates on an interface. This command stops the router from sending updates on that interface.

Syntax

passive-interface interface

To delete a passive interface conguration, use the no passive-interface interface command.

Parameters

interface Enter the following keywords and slot/port or number information:

• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet

then the slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

•

For a Loopback interface, enter the keyword loopback then a number from 0

to 16383.

• For a port channel interface, enter the keywords port-channel then a

number.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Defaults Not congured.

Command Modes ROUTER ISIS

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.