Users Guide

isis csnp-interval
Congure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds] [level-1 |
level-2] command.
Parameters
seconds Interval of transmission time between CSNPs on multi-access networks for the
designated intermediate system. The range is from 0 to 65535. The default is 10.
level-1 (OPTIONAL) Independently congures the interval of time between transmission
of CSNPs for Level 1.
level-2 (OPTIONAL) Independently congures the interval of time between transmission
of CSNPs for Level 2.
Defaults seconds = 10; level-1 (if not otherwise specied)
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
The default values of this command are typically satisfactory transmission times for a specic interface on a
designated intermediate system. To maintain database synchronization, the designated routers send CSNPs.
You can congure Level 1 and Level 2 CSNP intervals independently.
isis hello-interval
Specify the length of time between hello packets sent.
Syntax
isis hello-interval seconds [level-1 | level-2]
846
Intermediate System to Intermediate System (IS-IS)