Users Guide

graceful-restart t3
Congure the overall wait time before graceful restart completes.
Syntax
graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
Parameters
adjacency Enter the keyword adjacency so that the restarting router receives the
remaining time value from its peer and adjusts its T3 value so if you have
congured this option.
manual Enter the keyword manual to specify a time value that the restarting router uses.
The range is from 50 to 120 seconds. The default is 30 seconds.
Defaults manual, 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
Usage Information
The running router sets the remaining time value to the current adjacency hold time. You can override this
setting by implementing this command.
Override the default restart-wait time by entering the no graceful-restart restart-wait
command. When you disable restart-wait, the current adjacency hold time is used.
Set the t3 timer to adjacency on the restarting router when implementing this command. The restarting
router gets the remaining time value from its peer and adjusts its T3 value so only when you have congured
graceful-restart t3 adjacency.
Related Commands graceful-restart restart-wait — enables the graceful restart maximum wait time before a restarting peer
comes up.
840
Intermediate System to Intermediate System (IS-IS)