Users Guide

• the IPv6 address family conguration (under router bgp) is deleted
• IPv6 Multicast trac continues to ow unhindered
show ipv6 cam stack-unit
Displays the IPv6 CAM entries for the specied stack-unit.
Syntax
show ipv6 cam [vrf vrf-name] stack-unit unit-number port-set {0-1} [summary
| index | ipv6 address]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display IPv6
CAM entries corresponding to that VRF.
NOTE: If you do not specify this option, IPv6 CAM entries corresponding to
the default VRF are displayed.
unit-number Enter the stack unit’s ID number.
port-set Enter the keyword Port Set.
summary (OPTIONAL) Enter the keyword summary to display a table listing network
prexes and the total number prexes which can be entered into the IPv6 CAM.
index (OPTIONAL) Enter the index in the IPv6 CAM.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display networks that have
more specic prexes. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.1 Introduced on the S4810.
808
IPv6 Basics