Users Guide

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

8.4.2.1 Introduced on the C-Series and S-Series.

8.4.1.0 Introduced on the E-Series TeraScale.

Usage Information You can separately congure both IPv4 and IPv6 domain name servers.

ipv6 nd dad attempts

To perform duplicate address detection (DAD) on an interface, congure the number of neighbor solicitation messages that are sent.

Syntax

ipv6 nd dad attempts {number of attempts}

To restore the default value, use the no ipv6 nd dad attempts command.

Parameters

number of attempts Enter the number of attempts to be made to detect a duplicate address. The range

is from 0 to 15. Setting the value to 0 disables DAD on the interface.

Default 3 attempts

Command Modes INTERFACE (management interface only)

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.