Users Guide

Last update 00:05:01 ago
Routing Descriptor Blocks:
* 4.4.4.2, via GigabitEthernet 1/4
* 6.6.6.2, via GigabitEthernet 1/16
Dell(conf)#
show ip route list
Display IP routes in an IP prex list.
Syntax
show ip route vrf vrf-name list prefix-list
Parameters
prex-list Enter the name of a congured prex list.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to display IP routes in an
IP prex list corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Example
Dell#show ip route list test
Codes:C- connected, S - static, R - RIP,
B- BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
776
IPv4 Routing