Users Guide

process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain routing tag must be
displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected
routes.
all (OPTIONAL) Enter the keyword all to view both active and non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes the ip route
command congures.
summary (OPTIONAL) Enter the keyword summary. For more information, refer to the
show ip route summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.9.1.0 Introduced VRF on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information The following describes the show ip route all command in the following example.
Field Description
(undened) Identies the type of route:
• C = connected
• S = static
• R = RIP
IPv4 Routing
773