Users Guide

Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
NOTE: A lepath that contains a dot ( . ) is not supported.
show running-cong
Display the current conguration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status] [compressed]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) conguration, enter one
of the following keywords:
NOTE: If you did not congure anything that entity, nothing displays and
the prompt returns.
aaa
for the current AAA conguration
acl
for the current ACL conguration
arp
for the current static ARP conguration
as-path
for the current AS-path conguration
bfd
for the current BFD conguration
bgp
for the current BGP conguration
boot
for the current boot conguration
File Management
75