Users Guide
10.11.0.0/16 ManagementEthernet 1/1 Connected Connected
172.16.1.0/24 10.11.192.4 Active Static
show management application pkt-cntr
Display the number of packets for each application type that have taken the management route.
Syntax
show management application pkt-cntr
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.2.(0.0) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show management application pkt-cntr
dns : 2
ftp : 0
ntp : 0
radius : 0
sflow-collector : 0
snmp : 0
ssh : 0
syslog : 0
tacacs : 0
telnet : 0
tftp : 0
show management application pkt-fallback-cntr
Display the number of packets for each application type that have been rerouted to the default routing table due to management
port or route lookup failure.
Syntax
show management application pkt—fallback-cntr
Defaults None.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
690
Interfaces