Users Guide

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

8.1.1.0 Introduced on the E-Series ExaScale.

7.8.1.0 Output augmented with diagnostic data for pluggable media.

7.7.1.0 Removed three elds in the output: Vendor Name, Vendor OUI, and Vendor PN.

7.6.1.0 Introduced on the C-Series and S-Series.

6.5.4.0 Introduced on the E-Series.

Usage Information The following describes the show interfaces transceiver command shown in the following

example.

Line Description

Rx Power

measurement type

Output depends on the vendor, typically either “Average” or “OMA” (Receiver

optical modulation amplitude).

Temp High Alarm

threshold

Factory-dened setting, typically in Centigrade. Value diers between SFPs and

SFP+.

Voltage High Alarm

threshold

Displays the interface index number used by SNMP to identify the interface.

Bias High Alarm

threshold