Users Guide

Version Description

8.3.7.0 Introduced on the S4810.

7.7.1.0 Added support for TFTP and SCP.

7.6.1.0 Introduced on the S-Series.

Usage Information

RFC 3986 species that IPv6 host addresses in a uniform resource identier (URI) must be enclosed in

square brackets, [X:X:X:X::X]. For maximum exibility this command accepts IPv6 host addresses with or

without the square brackets.

After you upgrade the system image, by entering the command. specify the location where the Dell

Networking OS image used to boot the system is stored (boot system), save the conguration to the

start-up cong le (write memory), and reload the system (reload).

Example

Dell# upgrade system tftp://10.11.8.12/dv-rainier-13 a:

00:39:32 : Discarded 1 pkts. Expected block num : 51.

Received block num: 50

!00:39:36 : Discarded 1 pkts. Expected block num : 65.

Received block num: 64

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

...................................................

....................................................

.....................................................

..................................!

93924044 bytes successfully copied

System image upgrade completed successfully.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!

Image upgraded to all

HTTP Copy via CLI

Copy one le to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip

eld).

Syntax

copy http://10.16.206.77/sample_file flash://sample_filecopy flash://

sample_file http://10.16.206.77/sample_file

You can copy from the server to the switch and vice-versa.

Parameters

copy http:

flash:

Address or name of remote host []: 10.16.206.77

Port number of the server [80]:

Source le name []: sample_le

User name to login remote host: x

Password to login remote host:

File Management