Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced
Example (Single
Range)
This example shows the macro named test that was dened earlier.
Dell(config)#interface range macro test
Dell(config-if-range-gi-1/1-3,gi-5/1-47,gi-13/1-89)#
Dell
Related Commands
interface range — congures a range of command (bulk conguration).
interface range macro (dene) — denes a macro for an interface range (bulk conguration).
interface vlan
Congure a VLAN. You can congure up to 4094 VLANs.
Syntax
interface vlan vlan-id [of-instance{of-id}]
Parameters
vlan-id Enter a number as the VLAN Identier. The range is from 1 to 4094.
of-instance{of-id} Enter the keyword of-instance then the OpenFlow instance ID to add the VLAN to
the specied OpenFlow instance. The range is from 1 to 8.
NOTE: Associate the OpenFlow instance with the VLAN when the VLAN is
created. An existing VLAN cannot be associated with an OpenFlow
instance.
Defaults Not congured, except for the Default VLAN, which is congured as VLAN 1.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
646
Interfaces