Users Guide

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON. Added support for NFS mount.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

dir

Display the les in a le system. The default is the current directory.

Syntax

dir ([[flash://]path] nfsmount://<mount-point>/filepath)

Parameters

ash:

For a le or directory on the internal Flash, enter flash:// then the lename or

directory name.

nfsmount: For a le or directory on an NFS-mounted le system, enter nfsmount:// then

the mount point and le path.

NOTE: While displaying a le directory on a remote NFS le system, it is

mandatory to specify the mount-point that indicates the working directory

on the NFS le system. You cannot display details corresponding to the

root directory of the remote NFS le system.