Users Guide
!
10Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-------------------------------------------
0 active
1 active
redundancy synchronize
Manually synchronize data once between the Master and Stand-by stack units.
Syntax
redundancy synchronize [full]
Parameters
full Enter the keyword full to synchronize all data.
Default Not congured.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
show patch
Display the system patches loaded with the In-Service Modular Hot Fix command.
Syntax
show patch
High Availability (HA)
595