Users Guide
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Usage Information This command places you into the resilient ring protocol. After executing this command, the command line
prompt changes to conf-frrp.
show frrp
Display the resilient ring protocol conguration.
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identication number. The range is from 1 to 255
summary (OPTIONAL) Enter the keyword summary to view just a summarized version of
the Ring conguration.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
Force10 Resilient Ring Protocol (FRRP)
571