Users Guide

NOTE: In normal-reload, this keyword is not enabled.

Defaults Not congured.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced the support for bmp-boot on the S-Series and Z-Series switches.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Usage Information To display these changes in the show bootvar command output, save the running conguration to the

startup conguration (using the copy command) and reload system.

Use the bmp-boot keyword only when the device boots up from bare metal provisioning (BMP). For an

industrial standard upgraded device, the Dell networking OS stores the image partition upgraded from the

DHCP oer in the bmp-boot option.

Change to a dierent working directory.

Syntax

cd flash: <directory name and path>

Parameters

ash: Use the keyword flash: to enter the directory name and path.

directory name and

path

Enter the directory name and path as follows: directory name

([[flash://]directory_path])

Command Modes EXEC Privilege