Users Guide
ipv6 dhcp snooping verify mac-address
Congure to enable verify source mac-address against ipv6 DHCP packet mac address.
Syntax
[no] ipv6 dhcp snooping verify mac-address
To disable verify source mac-address against IPv6 DHCP packet MAC address, use the no ipv6 dhcp
snooping verify mac-address command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
ip helper-address
Congures the destination broadcast address or the host address for DHCP server requests.
Syntax
ip helper-address [vrf vrf-name] ip-address
To disable the destination broadcast address or the host address for DHCP server requests, use the ip
helper-address [vrf vrf-name] ip-address command.
Parameters
vrf vrf-name (Optional) Enter the keyword vrf and then the name of the VRF through which
the host address can be reached.
ip-address Enter an IP address through which the host address can be reached.
Default Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
Version 9.4.(0.0) Introduced on the S-Series and Z-Series.
538
Dynamic Host Conguration Protocol (DHCP)