Users Guide
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Added the vlan keyword and the vlan-id variable . Introduced support for SAV
on port channels interfaces.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Added the keyword ipmac.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information
Allocate at least one FP block to ipmacacl before you can enable IP+MAC Source Address Validation and
SAV with VLAN option.
1. Use the cam-acl l2acl command from CONFIGURATION mode.
2. Save the running-cong to the startup-cong.
3. Reload the system.
ip dhcp relay information-option
Enable Option 82.
Syntax
ip dhcp relay information-option [trust-downstream] [vpn]
Parameters
trust-downstream Congure the system to trust Option 82 when it is received from the previous-hop
router.
vpn Enter the keyword vpn to add VPN/VRF related sub-option to relay agent
information Option 82.
NOTE: Adds the VPN/VRF related sub-options into the relay agent
information option(82). When DHCP broadcasts are forwarded by the relay
agent from clients to DHCP server.
Default Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
536
Dynamic Host Conguration Protocol (DHCP)