Users Guide

================================
----- Buffer Stats for Interface Gi 1/0 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Gi 1/1 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Gi 1/2 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Gi 1/3 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Gi 1/4 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Gi 1/5 Queue 6 -----
Maximum Shared Limit: 7667
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
----- Buffer Stats for Interface Gi 1/6 Queue 6 -----
<output truncated for brevity>
Related Commands
clear hardware system-ow — clears the statistics from selected hardware components.
show interfaces stack-unit — displays information on all interfaces on a specic S-Series stack member.
show system (S-Series and Z-Series) — displays the current status of all the stack members or a specic
member.
show hardware buer interface
Display buer statistics for a specic interface.
Syntax
show hardware buffer interface interface{priority-group { id | all } |
queue { id| all} ] buffer-info
Parameters
interface interface
Enter any of the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
priority-group Enter the keyword priority-group followed by id for specic priority-group or
keyword all.
queue Enter the keyword queue followed by id for specic queue or keyword all.
buer-info To display total buer information for the interface, enter the keywords buffer-
info.
Command Modes
EXEC
500
Debugging and Diagnostics