Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

471

472

473

474

475

476

477

478

479

480

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0. Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the S-Series.

7.8.1.0 Introduced on the C-Series.

Usage Information When you enable this command, if a Policy Map containing classication rules (ACL and/or dscp/ ip-

precedence rules) is applied to more than one physical interface on the same port pipe, only a single copy of

the policy is written (only one FP entry is used).

NOTE: An ACL itself may still require more that a single FP entry, regardless of the number of

interfaces. For more information, refer to the “IP Access Control Lists”, “Prex Lists”, and “Route-

map” sections in the

Dell Networking OS Conguration Guide

show cam-acl

Display the details of the CAM proles on the chassis and all stack units.

Syntax

show cam-acl

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.