Users Guide

NOTE: There is a 140-character limit for prex list names.

summary Display a summary of RPF routes.

Command Modes EXEC

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant FTOS

Command Line Reference Guide.

The following is a list of the FTOS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.0.0.0 Introduced on the Z9000.

8.3.10.0 Introduced on the S4810.

Related Commands ipv6 prex-list — congures an IPv6 prex-list.

IPv6 MBGP Commands

Multiprotocol BGP (MBGP) is an enhanced BGP that enables the multicast routing policy throughout the internet and connecting

multicast topologies between BGP and autonomous systems (AS). FTOS MBGP is implemented as per IETF RFC 1858.

show ipv6 mbgproutes

Display the selected IPv6 MBGP route or a summary of all MBGP routes in the table.

Syntax

show ipv6 mbgproutes ipv6-address prefix-length | summary

Parameters

ipv6-address prex-

length

(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length

in the /x format. The range is from /0 to /128.

NOTE: The :: notation species successive hexadecimal elds of zeros.