Users Guide

All the show and debugs commands display the link band width extended-community prexed with DMZ-
Link-bw along with other extended communities.
Dell#show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1) Best
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, internal
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Related Commands
show ip bgp community — views the BGP communities.
neighbor maximum-prex — controls the number of network prexes received.
show ip bgp cluster-list
View BGP neighbors in a specic cluster.
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast]
cluster-list [cluster-id]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to view
cluster information of BGP neighbors corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the keyword multicast to
view information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 multicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related to only to the ipv6 unicast routes.
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format. The range is 1 —
4294967295.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
Border Gateway Protocol
423