Users Guide

To return to the default value, use the no neighbor {ip-address | peer-group-name}
local-as command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in
the peer group.
as-number Enter the AS number to reset all neighbors belonging to that AS. The range is from
0 to 65535 (2 byte), from 1 to 4294967295 (4 byte) or from 0.1 to 65535.65535
(dotted format).
no prepend Species that local AS values do not prepend to announcements from the
neighbor.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
If a local-as is congured, BGP does not allow for the conguration of BGP confederation. Similarly, if BGP
confederation is congured, then BGP does not allow the conguration of local-as.
This command automatically restarts the neighbor session for the conguration to take eect.
Related Commands bgp four-octet-as-support — enables 4-byte support for the BGP process.
neighbor maximum-prex
Control the number of network prexes received.
Syntax
neighbor {ip-address | peer-group-name} maximum-prefix maximum [threshold]
[warning-only]
Border Gateway Protocol
395